SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:

MFG: GEORG
YEAR: 1980


Model:                       KS160/250-1000W
Materials:                   GO, GNO, Copper, Alum., Silicon Steel
Min./Max. Coil Width:        2 - 41" (Trimmed)
Thickness Range:             0.006" - 0.018" (GO/GNO)
                             0.005" - 0.100" (Copper, Alum.)
Width Tolerance:             +/- 0.001"
Max. Shear:                  14,000 PSI (Alum.)
                             23,000 PSI (GO/GNO)
                             81,000 PSI (GO/GNO)
Max. Coil Weight (Entry):    15,000#
Max. Coil Weight (Exit):     6,000# @ 8" Dia. Drum
                             15,000# @ 24" Dia. Drum
Coil I.D. (Entry):           16" - 19" / 19" - 22" with Risers
                             22" - 24.5" with Risers
Coil I.D. (Exit):            8" & 24"
Max. Coil O.D.:              55"
Line Direction:              Right to Left
Mode of Operation:           Pull Thru / Driven
Line Speed:                  0 - 660 FPM (GO/GNO)
                             0 - 260 FPM (Alum./Copper)

Consisting of the following:

-Entry Coil Storage Saddle:
  Two (2) Full Width Coils

-Entry Coil Car:
  Pit Type
  Powered Lift and Traverse

-Uncoiler:
  Single Mandrel Type
  Hydraulic Expansion
  Sliding Base
  33.5 HP DC Motor Driven
  Holddown with Powered Snubber Roll
  Two (2) Sets of Bolt-On Risers (not confirmed)

-Automatic Edge Guide:
  Photo Electric Operation

-Entry Unit:
  Extending Blade Peeler
  Powered Entry Pinch Rolls
  Drag Type Tension Pad

-Slitter Head:
  Manual Side Guides
  6.3" (160 mm) Diameter Arbors
  Manual Top Arbor Adjust
  Adjustable Fingers
  Powered Entry Pinch Rolls
  Manual Scrap Guides with Shute
  20 HP DC Motor

-Scrap Baller:
  DC Motor powered
  Scrap Ball removal by Hydraulic Cylinder

-Pit Section:
  Entry Centenary Section
  Powered Carry Over Table

-Combination Tension Stand:
  Powered Traverse to Carry Over Strip
  Exit Centenary Section
  Three (3) Separator Tooling Shafts
  Two (2) Drag Boards
  Tension Rolls (Rubber Coated)
  25 HP DC Motor Braking System
  Exit Passline Rolls (Rubber Coated)
  Recoiler Feed Table

-Turret Recoiler:
  8" Dia. and 24" Dia. Drums
  Powered Horizontal Rotation
  Hydraulic Pushoff (Base Mounted)
  Powered Expansion (both drums)
  Powered Gripper (24" Dia. Drum)
  Holddown Arm
  107 HP (80 KW) Westinghouse DC Motor, 500 to 2000 RPM
  Gear Box Ratios, 15.4:1 and 11.36:1

-Exit Coil Car:
  Pit Type
  Powered Lift and Traverse

-Exit Turnstile:
  Two (2) Arms x 15,000# Each Arm @ 24" ID
  One (1) Arm x 6,000# @ 8" ID
  Powered Rotation

-Electrical Controls:
  Main Operators Control Console
  Auxiliary Operators Stations
  AC & DC Control Cabinets
  ABB Drive System (New in 2013)

-Slitter Tooling:
  Hub and "Packed" Arbor Tooling
  Carbide and standard Knives
  Steel Spacers
  Rubbers
  Misc. Separator Tooling

-Hydraulic Systems

-Spare Parts

-Removed and in storage











PRICE....................:  SEND A QUOTATION!!!