SLITTING & CUT-TO-LENGTH EQUIPMENT

SPECIFICATIONS:

MFG:  PRO ECO

Down Acting design
Strip Thickness:  .060-.375"
Strip Width:  18-72"(74" max.)
Strength:  50,000PSI
Length 24-480"
Blade:  Carbon Steel Knife-Single Rake
Blade Gap Control:  Powered Gap Control
Motor:  40HP AC-Fixed Speed
Centralized Lubrication System-Manual
Kick-out Roll:  Hydraulic Gear motor

The shear consists of the main housing, over driven clutch/brake 
flywheel arrangement, camshaft, sliding frame, top and bottom blade 
holder, gap control and kick-out roll assembly.

Main Housing
The main housing and base are of fabricated steel construction. The 
housing incorporates cam
rollers to support and guide the sliding frame in its travel. The main
 housing also supports the camshaft, clutch and brake assembly and 
drive.

Blade Holders
The upper and lower blade holders are of heavy steel plate 
construction, machined to accept the blade. The (upper) sliding frame 
is connected to the camshaft via pitmans running in large bronze 
bushings.

Camshaft
The alloy precision machined camshaft is supported in roller bearings 
in the housing and, in turn supports the clutch-brake and flywheel 
assembly. The camshaft drives the pitmans which give the vertical 
motion to the sliding frame.

Automatic Gap Control
The blades will automatically be set, by input from the PLC, to the 
proper clearance for the material being processed. An operator 
override is provided.

Drive
The flywheel is driven via vee belts and a pulley mounted on the drive
 motor. The flywheel has the clutch/brake assembly mounted to it which
 when actuated will tum the camshaft to initiate the cut cycle.

Line Speed:  25-150 FPM

Feed Length    Pieces Per Minute   Feet Per Minute       Gauge Range
24 	                 18              	    37 	        -0.000 +0.375
36 	                 15                 	47      	-0.000 +0.375
48 	                 13 	                55      	-0.000 +0.375
72 	                 11 	                70 	        -0.000 +0.375
96                 	 10                  	80      	-0.000 +0.375
120                	  8 	                88 	        -0.000 +0.375
144 	              7 	                95 	        -0.000 +0.375
240 	              6 	               111 	        -0.000 +0.375
360 	              4 	               120      	-0.000 +0.375
480 	              3 	               127 	        -0.000 +0.375

These are the Production expectations the Start/Stop Line that the 
Shear came out of- not the limits of the Shear itself.





PRICE....................:  SEND A QUOTATION!!!